52W29 Flame Sensor for Lennox,Ducane,Armstrong Furnaces G4...
**Introduction** The 52W29 Flame Sensor by TOMOON is designed for use in Lennox, Ducane, and Armstrong Furnaces models G40, G41, G50, G51, G60, G61, G71. This product is an essential component to keep your furnace running smoothly, ensuring the flame is properly detected. It's a perfect replacement for OEM parts such as 52W2901, 31L7101, 31L71, LB-74940A, and 28PV41. Available in a convenient pack of 2, it offers excellent value and reliability. **Advantages** 1. **Fast Delivery:** Many users have praised the quick delivery, ensuring you aren't left in the cold for long when your furnace needs repair. 2. **Great Price:** The product offers significant savings compared to local OEM options which can be more expensive. 3. **Simple Installation:** Installation is straightforward, making it easy for even those with limited technical skills to replace their flame sensor. 4. **Improved Performance:** Users have noticed that these replacements have better durability, often lasting longer without needing cleaning. 5. **Perfect Fit for Many Models:** The sensor fits well with a wide variety of Lennox furnace models, minimizing compatibility issues. 6. **Backup Availability:** With the pack of two, you have an immediate backup available, ensuring peace of mind. 7. **Solves Dirty Sensor Alerts:** The sensor effectively addresses issues with dirty sensor alerts, improving furnace functionality. 8. **Versatile Connector Compatibility:** Although some users notice it being slightly larger, it still fits well with existing connectors and improves its stability. 9. **Consistent Functionality:** Users report the sensors work reliably over extended periods. 10. **Future-Proof Solution:** Having a reliable sensor means fewer worries about future furnace issues during winter months. **Disadvantages** 1. **Connector Size Issue:** Some users found the connector a bit larger than expected, requiring minor adjustments. 2. **Slight Size Difference:** The sensor is taller than some OEM parts, which might not fit in every configuration without modifications. 3. **Potential Grinding Needed:** In some cases, users had to grind the part to fit the existing socket perfectly. 4. **Limited Local Availability:** Users mention the inconvenience of limited local availability, leading to reliance on shipping. 5. **Variation in Model Compatibility:** Although it fits many models, users must double-check compatibility before purchase. 6. **Older Connectors May Need Modification:** For older furnaces, users may need to snip or modify connectors for a proper fit. 7. **Initial Fitting Issues:** Occasionally, the new part may not fit as seamlessly into older setups, requiring some adjustment. 8. **Packaging Only offers Basic Instructions:** The product may not come with detailed installation guides, requiring some users to look up instructions online. 9. **Non-OEM Concerns:** Some customers prefer OEM parts and are cautious about third-party alternatives. 10. **Stock Availability:** During peak seasons, stock might be limited, delaying replacement. **Conclusion** The 52W29 Flame Sensor by TOMOON offers a reliable and cost-effective solution for maintaining the performance of your Lennox, Ducane, and Armstrong furnaces. Despite minor fitting concerns, its advantages in price, delivery, and lasting performance make it a favorable choice for many users. This product is ideal for anyone looking to quickly and affordably address furnace maintenance needs. **FAQ** 1. **Will this flame sensor fit my specific furnace model?** - This sensor fits many Lennox, Ducane, and Armstrong models like G40 to G71, but it’s best to confirm your model’s compatibility. 2. **What tools will I need for installation?** - Basic tools such as screwdrivers might be required, and in some cases, a dremmel may be needed to adjust the fit. 3. **How long does delivery typically take?** - Most users report very quick delivery, ensuring fast service. 4. **Is the connector compatible with all models?** - While generally compatible, some users find the connector slightly wider and might require adjustments. 5. **Does this pack come with installation instructions?** - Often, detailed instructions are not included; users may need to seek online resources. 6. **What should I do if the part doesn't fit perfectly?** - Users have successfully used tools like a dremmel to modify parts for a better fit. 7. **How does this relate to dirty sensor alerts?** - These sensors are noted to eliminate frequent dirty sensor alerts, improving furnace efficiency. 8. **What if I need to modify my connector?** - Modifications are simple; users sometimes snip or adapt their connectors without issue. 9. **Is buying a non-OEM part a risk?** - While preferences vary, many find the performance of this non-OEM part satisfactory. 10. **What benefits does having a 2-pack provide?** - It offers a reliable backup, ensuring you have a spare in case of future failures.
Best Proviews by Replacement Parts
3-00-03000 - Replacement HARMAN Fireplace Flame Guide, P68, XXV, Acc Ins, HF60, HydroFlex 60 – HF60, Heatilator Eco-Choice BH60 -BEST PRICE!
Show
3379
Self Adhesive Stove Window Glass Gasket Tape, 1" Width 72" Length, Flat Stove Door Glass Gasket, Self Stick Flat Gasket Tape for Stove and Fireplace Window Glass
Show
2287
Woodstove Firebricks, Upgrade Fire Bricks Replacement for US Stove FBP6, Size 9" x 4-1/2" x 1-1/4", 6-Pack
Show
3578
Midwest Hearth Wood Stove Replacement Gasket Kit for Woodburning Stoves - Graphite Impregnated Fiberglass Gaskets and Adhesive (5/8" x 84" Rope)
Show
1053
Flat Gasket Tape for Stoves and Fireplaces, Self Adhesive Flat Gasket, 5/8"x1/8" Length 72" Wood Stove Flat Gasket Tape
Show
1396
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Title: Didn't fit perfectly, Lennox G51MP
Content: Got it fast and great price. Had to grind the plug down a bit with the dremmel to fit the existing socket. Part is taller then the previous one but works great. We have heat again.
Title: direct replacement
Content: Very quick delivery. Part fit perfectly.
Title: Not identical but does work
Content: My furnace is Lennox G40DF The replacement is longer than OEM. The spade connector is a lil wider but fortunately it did fit with the current connector. Based on reviews i was prepared to change to a wider connector but glad I didn't have to. Install is simple and it fixed my issue. Great price for 2 pack.
Title: They work
Content: Furnace
Title: Confirmed Working Fit for Lennox G40DF-36A-070-05
Content: This was a bit longer in than the flame sensor that was installed, although we had been regularly getting dirty sensor alerts. This year it was time, for a new one. Since the local supply places don't stock parts anymore... you have to wait for shipping one way or another. Locally I was looking at approx. $30 for a single sensor, that was also OEM. For the same amount of time, half the cost and no labor fee, I was back running perfectly before the arctic winds hit. And we have a future backup!
Title: Did not fit my Lennox gas forced air unit
Content: Blade connector was to large and would not connect to wire terminal spade.
Title: Working Great!
Content: Easy installation and working away. Can’t beat that!
Title: Works and perfect fit
Content: Perfect fit for our Lennox elite furnace. We seem to need this part every couple years. Great price and simple to install
Title: Quality sensors
Content: These replacements have not needed to be "cleaned" in over a year, compared to previous rods.
Title: It worked!
Content: It worked on my older Ultra V Tech 80 furnace #45647-001 I did have to snip off the older female electrical quick tab/spade connector…as the male flame sensor tab was slightly bigger. That was No was no problem, turned furnace back on and it’s been working good since. I keep my furnace and water heater clean and maintained all the time.
Amazon Subscribe & Save - Unlock Great Deals, Enjoy Hassle-Free Shopping
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
- SPEC: 52W29 Flame Sensor for Lennox/Armstrong/Ducane Furnace .this flame sensor detects the furnace flame to ensure ignition. It then monitors the flame until the furnace is turned off. The total lenth is approx: 5.3 inch
- PERFECT FIT:The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.Replacement part numbers,52W2901, 52W29, 31L71, LB-74940A, 31L7101, 28PV41.Fits G40, G41, G50, G51, G60, G61, and G71 furnaces
- APPLICATION: The flame sensor senses the furnace flame and ensures that ignition occurs,f the sensor does not detect flame, it shuts the gas valve off, preventing raw gas from dumping into your home
- HIGH QUALITY LONG LASTING: made of high quality durable and wear resistant metal, free from harmful chemicals and tested many times by the manufacturer to be safe for use. Improve the efficiency of the furnace and get a longer service life
- BUY WITH CONFIDENCE: We’re confident in the design and quality of this. For any reason you're not completely satisfied, or you are not sure whether this replacement part correctly fit your appliance, please feel free to contact us or ask a question through Amazon
Note: This is not an advertisement; we are dedicated to promoting items to assist people in
finding deals quickly and efficiently, ultimately saving them money. Explore and test market all
the latest deals and promotions conveniently gathered in one website for a seamless and
money-saving shopping experience.
