Rutland Products Rutland 96-6 Grapho-Glas Rope Gasket Repl...
**Introduction** The Rutland Products Rutland 96-6 Grapho-Glas Rope Gasket Replacement Kit is an essential tool for maintaining your wood stove, pellet stove, or outdoor cooker. Renowned for its quality and reliability, this kit is designed to provide a secure seal, ensuring optimal performance and safety. The 3/8-inch by 7-feet black graphite rope gasket is perfectly crafted to withstand high temperatures and enhance the efficiency of your heating appliances. This product comes with all necessary components, making it a convenient solution for DIY enthusiasts. **Advantages** 1. **Superior Quality**: Many users appreciate the high-quality nature of the gasket, which often outperforms other brands. 2. **Easy to Use**: Most reviews highlight the ease of installation, even for those with minimal DIY experience. 3. **Graphite Coating**: The black graphite coating reduces sticking issues, as noted by users who experienced difficulties with other gaskets. 4. **Value for Money**: Customers find the kit to be a great value, offering more materials than needed for a single job. 5. **Durability**: The gasket maintains its integrity over time, ensuring a long-lasting seal. 6. **Comprehensive Kit**: Comes with adhesive and rope, providing everything needed for installation. 7. **Consistent Performance**: The gasket forms a reliable seal that improves appliance efficiency and safety. 8. **Versatile Use**: Suitable for multiple appliances, including wood stoves and pellet stoves. 9. **Detailed Craftsmanship**: The weave of the rope gasket allows for a secure fit without changing its original diameter. 10. **Positive Customer Feedback**: High satisfaction rate among users who have used the rope gasket across different devices. **Disadvantages** 1. **Stiff Adhesive**: Some users find the adhesive very stiff, requiring extra preparation time to soften. 2. **Adhesive Cleanup**: The glue can be messy, necessitating careful application to avoid spreading on unwanted surfaces. 3. **Requires Instruction**: Lack of included instructions; some users need to seek guidance from online sources. 4. **Initial Tight Fit**: The gasket can be tight initially, needing a few uses to settle in comfortably. 5. **Time-consuming Preparation**: Preparing the surface by cleaning down to bare metal can be time-consuming. 6. **Potential Air Pockets**: There can be air pockets in the adhesive tube, which might cause sudden bursts. 7. **Glove Requirement**: It’s advisable to use gloves during installation to avoid skin contact with the adhesive. 8. **Temporary Storage Issues**: Adhesive storage conditions can impact usability, requiring temperature considerations. 9. **No Reusability of Tools**: Tools used for applying the adhesive are usually disposable after a single use. 10. **Frequent Replacement**: Annual replacement might be required for outdoor stoves, especially in tough conditions. **Conclusion** The Rutland Products Rutland 96-6 Grapho-Glas Rope Gasket Replacement Kit is an invaluable solution for anyone looking to maintain the efficiency and safety of their stoves. While there are some minor drawbacks, such as the need for careful adhesive management and preparation, the overall value and quality offered by this kit are widely recognized by satisfied customers. It’s an excellent choice for those committed to ensuring their heating appliances operate smoothly and effectively. **FAQ** 1. **How do you install the Rutland rope gasket?** - Ensure the surface is clean and down to bare metal, apply the adhesive, and gently push the gasket into the groove, avoiding stretching. 2. **Can the gasket be used on any type of stove?** - Yes, it is versatile and can be used on wood, pellet stoves, and cookers. 3. **What to do if the adhesive is too stiff?** - Immerse the adhesive tube in hot water for 20-30 minutes and knead it to soften. 4. **Is there a risk of the door sticking to the gasket?** - The graphite coating reduces sticking issues compared to white gaskets. 5. **How long does the adhesive take to set?** - The adhesive sets in about 15-20 minutes, but check and remove any excess glue before it fully hardens. 6. **Are there enough materials for more than one installation?** - Yes, many users report having leftover materials after the job. 7. **Do I need special tools for the installation?** - It’s advisable to have disposable tools for spreading adhesive, as the glue can be messy. 8. **Can the gasket withstand high temperatures?** - Yes, it is designed for high-temperature environments typical of stove use. 9. **What should I do if I have more questions about installation?** - Online DIY video tutorials can be helpful for additional guidance. 10. **Does the kit include everything needed for installation?** - Yes, it comes with the rope gasket and adhesive, providing a complete installation solution.
Regular Price: $10.98
Brand Name: RUTLAND PRODUCTS
Seller Name:
-
Total Rating Count: 532
Best Proviews by Replacement Parts
3-00-03000 - Replacement HARMAN Fireplace Flame Guide, P68, XXV, Acc Ins, HF60, HydroFlex 60 – HF60, Heatilator Eco-Choice BH60 -BEST PRICE!
Show
3379
Self Adhesive Stove Window Glass Gasket Tape, 1" Width 72" Length, Flat Stove Door Glass Gasket, Self Stick Flat Gasket Tape for Stove and Fireplace Window Glass
Show
2287
Woodstove Firebricks, Upgrade Fire Bricks Replacement for US Stove FBP6, Size 9" x 4-1/2" x 1-1/4", 6-Pack
Show
3578
Midwest Hearth Wood Stove Replacement Gasket Kit for Woodburning Stoves - Graphite Impregnated Fiberglass Gaskets and Adhesive (5/8" x 84" Rope)
Show
1053
Flat Gasket Tape for Stoves and Fireplaces, Self Adhesive Flat Gasket, 5/8"x1/8" Length 72" Wood Stove Flat Gasket Tape
Show
1396
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Title: Excellent quality and long lasting gaskets
Content: I have used Rutland brand gaskets on Wood stoves, Pellet Stoves and Big Green Egg cookers and I do not bother with other brands. Great price for the superior quality. The key to using any of the Rutland gaskets is to make sure you do not pull the gasket tight as you are installing it in the groove. The way these are made with the weave, you want to push the gasket back from where you're feeding it from. Kind of like bunching it in on itself. That way when you are done installing it, the door has a firm feel to it when latching it. You're not bunching it real tight and you will see when installing it that the gasket keeps its diameter of the size indicated on the package. This style of round 3/8" gasket worked perfect for my Harman Pellet stove door. I did not have any issues with the high temp silicone like some other users have mentioned. I usually put about a 1/4" bead of this all along the groove on wood or pellet stove doors. You want to make sure the surface is down to bare metal. This is easily done with a drill motor and small wire wheel.
Title: Good fit and seal.
Content: Worked well for sealing the door on our wood stove. Complete kit with more than enough gasket and adhesive to complete the job.
Title: Worked great.
Content: The cement set up perfectly, held gasket well and was easy to apply. Gasket was easy to place and cut and I found this kit to be a good value.
Title: Be prepaired to deal with it ! But works great. Glue will clean up with warm water.
Content: The gasket is great, the "Black Graphite" one is better to me than the "white" it seems to not stick to the door as much when the door is closed & not in use for a time. With the white, after sitting & not in use for a time the door would stick to the gasket & actually pulled some of it off once, the graphite in the Grapho-Glas seems to help that. As others have written however, the glue is very stiff, I immersed it in hot water for about 20-30 minutes & kneaded for about 5 minutes (Knead it more than I did!) but still is stiff so as you're squeezing fairly hard to dispense it along the area it will come to an air pocket & "Pop" blowing the stuff out of the channel then you will need some disposable tools like break or cut some popsicle sticks in half and use the flat side to get the glue back into channel. I had it on my hands my screwdrivers all my rags & the door. The glue does clean up well with warm water, the towel used will be history however. Be sure to get it off the door, close & latch the door then open & look for traces of the glue on the door & get it off, do this a few times until sure it's not transferring. You will want to close & latch the door to set the gasket well & tight into the glue, after about 15-20 minutes the glue will set & can be scrapped of with knife or putty knife. Just don't let the door get glued to the front of the gasket. worked out great & would use it again when needed.
Title: Great kit
Content: Great kit, my husband had the seal fixed to our pellet stove in a short amount of time. Happy with this product.
Title: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely
Content: Fit my vintage stove perfectly. A little tight for a fire or two but flatend out nicely.
Title: The silicon is a little tough coming out of the tube
Content: Solved the problem with my wood stove
Title: Works great
Content: We have an outside wood stove and once a year we have to replace the rope on the door. We have tried other brands, but this one seems to work the best and a great value.
Title: Read the instructions on the adhesive CAREFULLY
Content: Easy to fit (just make sure you wear gloves and knead the adhesive tube for 2 minutes to smooth out the lumps and push out the air bubbles) and looks better than the old white asbestos type rope
Title: Lots of gasket, lots of cement.
Content: No instructions, but YouTube has several. Seems high-quality, and there was cement left over. Took me more time to remove the old one and scrape out the glue than it did to put the new one in.
Amazon Subscribe & Save - Unlock Great Deals, Enjoy Hassle-Free Shopping
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
- 3/8" rope, 7-feet long, 1.3oz cement
- Convenient package includes graphite-impregnated gaskets and a single-use tube of EZ-Spread gasket cement to make replacing your stove or fireplace gasket painless
- Rutland gaskets last longer than traditional gaskets, resist unraveling, and impede creosote or soot adhesion
- Replace your old, worn out gasket in your fireplace, or wood, pellet, or coal stove to restore it's efficiency and safety
- Grapho-Glas gaskets are the best choice for replacing your stove gasket
Note: This is not an advertisement; we are dedicated to promoting items to assist people in
finding deals quickly and efficiently, ultimately saving them money. Explore and test market all
the latest deals and promotions conveniently gathered in one website for a seamless and
money-saving shopping experience.
