Pro-Parts F226831 26831 Rotor Kit Replacement for Mr Heate...
### Introduction The Pro-Parts F226831 26831 Rotor Kit Replacement is a targeted solution for restoring functionality to Mr Heater Heat-Star Kerosene Heaters with a capacity ranging from 50,000 to 210,000 BTU. Designed to save users significant repair costs, this rotor kit promises to rejuvenate heaters with parts that fit seamlessly, enhancing performance. However, it is essential for buyers to assess compatibility with their specific heater models, as feedback highlights varying experiences. ### Advantages 1. **Cost-Effective**: Users reported significant savings, as this kit provided an affordable alternative to replacing the entire heater. 2. **Ease of Installation**: For many, the rotor kit was straightforward to install, minimizing downtime. 3. **Enhanced Heater Performance**: Several reviews noted noticeable improvements in heater efficiency with new parts. 4. **Durability**: When properly fitted, the components, particularly the graphite impeller, demonstrated good durability. 5. **Versatile Application**: Compatible with a range of heater models, increasing its applicability. 6. **Graphite Impeller**: This specific part was routinely praised for fitting well and enhancing performance. 7. **Customer Support**: Some users appreciated responsive support for queries related to fitting. 8. **Problem Resolution**: Successfully solved pressure-related issues for heaters it was compatible with. 9. **Availability**: Easily found and ordered online, providing a convenient repair option. 10. **User Recommendations**: Positive feedback from those who successfully installed it with model-appropriate hubs. ### Disadvantages 1. **Compatibility Issues**: A significant number of reviews noted that the plastic hub did not fit well on certain models. 2. **Plastic Hub Concerns**: The plastic hold pin for the impeller often failed to fit properly, causing frustration. 3. **Limited Compatibility with Older Models**: Older heater models, like the 175,000 BTU series, encountered more fitting issues. 4. **Potential Additional Modifications**: Some users had to manually modify parts for proper fit, which can be labor-intensive. 5. **Inconsistencies in Information**: Reports of misinformation regarding compatibility led to some unsuccessful purchases. 6. **Graphite Material Fragility**: The graphite components are delicate and can break if handled roughly. 7. **Return and Refund Limitations**: Some users noted challenges in returning the product after fitting issues due to time lapsed. 8. **Pressure Issues in Some Cases**: Even when fitting was successful, pressure performance varied. 9. **Lack of Installation Guidance**: Some users needed to rely on their skills due to sparse instructions. 10. **Improvement Needed in Product Design**: The recurring fitting issues suggest a need for refined product design. ### Conclusion The Pro-Parts F226831 26831 Rotor Kit Replacement presents a mixed bag of user experiences. While it offers a cost-effective solution for renewing heater efficiency and provides an easy installation process for some, the repeated compatibility issues highlight the necessity for improved design to cater to a broader range of Mr Heater models. Prospective buyers should verify compatibility with their specific heater model to maximize the benefits of this replacement kit. ### FAQ 1. **Q: Is this rotor kit compatible with all Mr Heater models?** A: No, compatibility issues have been noted with older models like the 175,000 BTU series. 2. **Q: What should I do if the plastic hub doesn't fit my heater?** A: Some users have modified the hub or used existing components from their heater for a better fit. 3. **Q: Can I return the kit if it doesn’t fit?** A: Ensure to check return policies before purchasing, as issues have been reported with returning after 30 days. 4. **Q: Does the kit improve heater performance?** A: Yes, many users noted improved performance with new parts. 5. **Q: How durable is the graphite impeller?** A: It’s durable but fragile; handle with care during installation. 6. **Q: Are there any common installation issues?** A: Improper fitting of the plastic hubs has been frequently reported. 7. **Q: Do I need special tools for installation?** A: Typically, no, but modifications may require basic tools like a drill. 8. **Q: Are installation instructions included?** A: They can be sparse, so check additional resources or contact customer support if needed. 9. **Q: Is customer service responsive to issues?** A: Some users have had good experiences with customer support addressing their concerns. 10. **Q: What models is this rotor kit most effective for?** A: It’s best for newer models that closely match the specifications provided by Pro-Parts.
Best Proviews by Space Heater Replacement Parts
750℃ temperature Resistance Millivolt Replacement Thermopile Generators Used On Gas FirePlace/Water Heater/Gas Fryer Cluster Thermocouple for 24" Fireplace
Show
1696
Pro-Parts New Replacement PP204 HA3004 1/2" Rotor Kit for Desa Master Reddy Sears Space Heaters #70-022-0100
Show
2748
M16545 Filter Cover PP217 Pump Kit PP214 Filter Kit Replaces On Desa Master, Reddy, Remington Heaters
Show
1537
Mr. Heater Flame Sensor Kit for All Kerosene Forced Air Heaters
Show
3019
Ganivsor 24" Thermopile Generators 750 Millivolt Thermopile Q313A for Gas Water Heater/Fireplace/Gas Fryer/Oven, 750 Temperature Resistance Cluster Thermocouple for Fireplace (24" Aluminum)
Show
2650
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Title: Exact replacement
Content: Was easy to install. Saved me a lot of money and got my heater up and going again
Title: Great product
Content: didn't realize how much better these heaters work with new parts
Title: Shop heater
Content: Worked great 👍
Title: Plastic hub doesn't fit Mr. Heater 175,000 BTU heater shaft
Content: I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Title: Doesn’t fit Mr. Heater MH125KT
Content: Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Title: Product came in good shape
Content: I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Title: Doesn’t fit the 140,000 btu master from tractor supply
Content: I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Title: Does not fit all models that are stated !
Content: Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Title: Mr heater contractor series 125000 btu Fuel pump.
Content: Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
Title: The right part
Content: Right price
Amazon Subscribe & Save - Unlock Great Deals, Enjoy Hassle-Free Shopping
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
- F226831,26831,5/8" Rotor kit for 2014 to Current
- Fits for Mr. Heater Heat-Star Heaters 50,000 thru 210,000 BTU Kerosene Models
- Models:HS50K,HS75KT,MH75KTR,HS125KT,MH125KTR,HS175KT,MH175KTR,HS210KT,MH210KTR and more
- Includes Rotor ,4 Vanes and Shaft Insert
Note: This is not an advertisement; we are dedicated to promoting items to assist people in
finding deals quickly and efficiently, ultimately saving them money. Explore and test market all
the latest deals and promotions conveniently gathered in one website for a seamless and
money-saving shopping experience.
