US Stove Company Cast Iron Wood Stove with Cool Touch Safe...
**Introduction** The US Stove Company Cast Iron Wood Stove is a robust heating solution designed to deliver an impressive 54,000 BTUs, keeping your space warm and cozy even in the coldest conditions. Engineered with a solid cast iron construction and a cool touch safety handle, this wood stove is ideal for those who value both safety and performance. Whether using it as a primary or backup heating source, this stove promises to bring warmth and a touch of rustic charm to your home. **Advantages** 1. **High Heat Output:** Capable of producing up to 54,000 BTUs, it effectively heats large spaces. 2. **Energy Independence:** Ideal as a backup heat source during power outages, ensuring warmth when needed most. 3. **Rustic Aesthetic:** The cast iron design adds a quaint, traditional look to any setting. 4. **Reliable Draft Control:** When used properly, the draft control helps maintain a consistent fire. 5. **Durability:** Many users appreciate its sturdy construction and longevity when intact. 6. **Efficient Log Utilization:** Supports logs up to 19 inches in size, maximizing fuel utilization. 7. **User-Friendly Setup:** Once assembled, it efficiently maintains a hot, sustainable fire. 8. **Outdoor Compatibility:** Effectively heats small outdoor spaces, such as sheds or studios. 9. **Responsive Customer Service:** The company is attentive in resolving product issues through customer support. 10. **Affordability:** Provides good value for the price when functioning as intended. **Disadvantages** 1. **Quality Control Issues:** Multiple reports of shipping damages like chipped components and broken parts. 2. **Inconsistency in Cast Iron Quality:** Some parts have been noted as being made from cheaper metals, affecting overall durability. 3. **Assembly Challenges:** Improper fittings, especially in the leg and flue areas, make assembly difficult. 4. **Poor Draft System:** Reports of inadequate airflow and smoke issues due to design inefficiencies. 5. **Variable Pricing:** Price fluctuations noted on online platforms, affecting perceived value. 6. **Fuel Maintenance:** Requires frequent replenishment during continuous use for optimal performance. 7. **Functional Modifications Needed:** Some units require personal modifications for proper functionality. 8. **Packaging Problems:** Frequent reports of damage due to poor packaging during shipment. 9. **Inconsistent Door Seals:** Some users reported doors not sealing properly, leading to inefficiencies. 10. **Handle Issues:** The handle appears to be prone to detachment, causing operational inconveniences. **Conclusion** The US Stove Company Cast Iron Wood Stove stands as a potentially worthwhile investment for those seeking a reliable backup or primary heat source. Its impressive heat output and classic design are balanced by notable quality control and performance issues. While the stove can provide efficient heating with the right conditions and modifications, potential buyers should weigh these factors against their heating needs and budget constraints. **FAQ** 1. **What size logs can this stove accommodate?** - The stove can hold logs up to 19 inches long. 2. **How often should I add fuel to maintain heat overnight?** - You may need to add more fuel every 2-3 hours for continuous heat through the night. 3. **Is the assembly of the stove difficult?** - Some users have experienced challenges with assembly due to misfit parts and poor instructions. 4. **What are the common issues faced by users?** - Common issues include damage during shipping, poor draft, and misfit assembly parts. 5. **Does the stove come with a flue collar?** - It does, but reports indicate that it may require modifications to fit properly. 6. **How does the draft control work?** - The draft control is designed to regulate airflow, though its effectiveness can vary per installation. 7. **Are there any special installation requirements?** - Quality piping and chimney systems are recommended for optimal performance. 8. **What is the benefit of the cool touch safety handle?** - It provides safe usage by preventing burns during operation. 9. **Is customer support responsive to issues?** - Yes, many users appreciate the company's responsiveness to problems with product support. 10. **How does this stove compare in value?** - It offers good value for the price, particularly if the unit is intact and performs well.
Regular Price: $388.29
Brand Name: US Stove
Seller Name:
-
Total Rating Count: 740
Best Proviews by Wood Burning Stoves
US Stove Company Rustic 900 Square Foot Clean Cast Iron Log Burning Wood Stove with Integrated Cooking Surface and Cool Touch Safety Handle
Show
3094
Ashley Hearth AW2020E-P 2,000 Sq. Ft. Pedestal Burning Stove, Black
Show
2430
Wood Stove,Portable Camping Wood Stove,Hot Tent Stove with Sectional Chimney Pipes,Outdoor Tent Stove,Small Wood Burning Stove for Outdoor Camping, Hunting, Cooking, Hiking, Fishing
Show
2871
F400 Castine Wood Stove Glass Kit (3/16" Thick)
Show
3026
Buck Stove 9" x 6 1/2" Glass
Show
1952
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Title: Missing a hole for the door peg
Content: The first stove came very chipped in the front it almost cut my hand. So I had them come and get it. The second one had missing holes so I asked for new door. They send me a new door with a hole in it like it was supposed to be so I changed my rating to 4 stars. But I still had to drill a hole myself where the door attaches. It's a nice stove. It's warm once heated. But the handle keeps falling off. The company takes care of you if you send them pictures. Other then that I'm happy with the stove. It's warm and it's really fun to warm up to on a cold day.
Title: Good low priced stove
Content: Works well but needs good quality piping and chimney
Title: WASTE OF MONEY!
Content: Doesn't do anything good! Made from the cheapest of metal! Supposed to be cast iron, but more like pot metal! Castings are of the lowest "quality", core shift is obviously a major problem! Two legs on opposite ends broke off after assembly because one leg didn't even reach the floor! It sat about 2-3 inches off the floor! After disassembling and reassembling multiple times to try and get the legs level, ended up getting one leg to sit only 1-2 inches off the floor! The flue collar was cast so poorly that it will never fit into the cast in flange it is supposed to sit in. I spent three hours grinding on it to finally get it to fit. I "tried" to get a fire started in it, only to discover it won't draw worth crap! Smoke filled the room every single time I opened the door, and every time I closed the door, the fire would go out! I even had placed 4 fire bricks in the bottom as suggested by the manufacturer. The problem is it just doesn't draw enough fresh air to support combustion with the door closed, and the huge block mounted in the top that fully blocks the flue opening certainly can't be helping. This is what you get when mindless zombie bureaucrats at the EPA forcing their stupidity on people. If possible, I'm going to try to get a refund, but as I had to modify it, I doubt that will be possible. I wasted $414 dollars on this thing, and I don't understand why the price fluctuates daily on Amazon. Right after buying and before it arrived, I saw the price drop to $389, then rise to over $700 and it's currently $500! What is up with that? It would be overpriced at $100!
Title: Will do the job
Content: I purchased this stove for back up heating when the power goes out. It’s smaller than I expected. The listing says it can hold 19 inch logs and it will, but take the thickness you would expect a normal wood stove to accept and split it again. When I received the stove the packaging was beat up pretty bad. Fortunately, when I opened it up, the damage was pretty much cosmetic around the top edges, pieces broken off, etc. but the firebox is completely intact. I installed with a flue damper about 18 inches above the stove. I didn’t make any changes to the stock draft controls built into the stove. When I started the first fire I tried to start in the middle (front to back). Not ideal. I then started with much smaller kindling and much smaller fire all the way in the back beneath the flue. This worked great. Once the kindling was burning well, I gradually added larger and larger pieces towards the middle and then the front of the firebox. I noticed that the fire easily worked it’s way forward until I had a nice, hot, self sustaining fire. Once established I could add larger logs. The stove has a well designed draft control if you use this approach. Some say their doors don’t seal but the door on mine seals up nicely, no leaks, no problems. The stove burned all night and in the morning only embers remained. I will say, if you’re going to use this stove to heat through a cold winter night you’ll need to add more fuel every 2~3 hours. If you have good draft, I wouldn’t make any changes to the draft controls built into the stove.
Title: EASY HEAT - Great Build
Content: Love this - had it almost a year now, really performs well in a 10x16 "converted shed/studio" keeps it toasty and comfortable. Live in Montana.
Title: You can cook on this baby
Content: Well made stove and great value
Title: Get the protection plan
Content: The lip on the back of the stove was broken off.
Title: Wonderful! Great heat!
Content: Love this cast iron stove! After setting it up, we all lost power during winter, thank goodness for this unit!! Saved us all from freezing!
Amazon Subscribe & Save - Unlock Great Deals, Enjoy Hassle-Free Shopping
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
- Capable of reaching temperatures up to 54,000 BTUs and heat up 900 square feet of surface
- Comes equipped with a 2-piece safety handle that remains cool and safe to touch even as the stove is burning and a heavy duty cast iron body to bring classic and modern styles together
- Large enough to fit logs of up to 19 inches in length to keep your stove burning for a long time and saving you less log-cutting trips when running low on fuel
- Heat up your cabin for those cold winter nights and get both sustenance and warmth in one go
- Stands at 33 inches long and 18.5 inches wide with 23 inches of height and a weight of about 130 pounds for ideal use in cabins and other small structures outdoors
Note: This is not an advertisement; we are dedicated to promoting items to assist people in
finding deals quickly and efficiently, ultimately saving them money. Explore and test market all
the latest deals and promotions conveniently gathered in one website for a seamless and
money-saving shopping experience.
