Magic Splash Guard Kit - Prevent Water from Splashing out...

Magic Splash Guard Kit - Prevent Water from Splashing out...

More Trends All Proviews Here

**Introduction** The Magic Splash Guard Kit promises a simple and effective solution to an age-old bathroom problem – water splashing out from the bath or shower area. Designed for easy installation, this product aims to keep your bathroom floor dry, courtesy of its unique construction meant to fit the corners of any standard tub or shower stall. With a crisp white finish, it blends seamlessly with most bathroom decor. However, user experiences reveal a spectrum of performance that demands a more detailed exploration. **Advantages** 1. **Easy Installation:** Many users find the installation process straightforward, often achievable without professional help. 2. **Strong Adhesive:** The adhesive used is generally strong, ensuring the product remains in place with the proper addition of caulk. 3. **Flexibility:** The guard exhibits some flexibility, reducing the risk of breakage upon accidental impact, such as bumping it with a foot. 4. **Size Compatibility:** This product is favored for its compact size that fits many tub and shower configurations where larger solutions cannot. 5. **Reduces Water Damage:** Successful installations have prevented water from escaping, protecting floors and preventing water damage. 6. **Child-Friendly:** Ideal for households with kids, it helps contain energetic water activities like bath-time battleships. 7. **Robust for Specific Uses:** Once the initial flaws are mitigated with caulk, it functions effectively in tailored settings. 8. **Good for Purpose-Specific Installations:** When installed with additional materials, such as silicone caulk, it performs well for its intended purpose. 9. **Keeps Bathrooms Clean:** With water splashes contained, users notice a cleaner, drier bathroom environment. 10. **Budget-Friendly Solution:** Considered economical compared to more expensive water guard systems. **Disadvantages** 1. **Not Flexible Enough:** The splash guard struggles with fit if the bathroom’s angles deviate even slightly from 90 degrees. 2. **Adhesive Limitations:** The included double-sided tape often fails to adhere effectively, especially on non-tile surfaces. 3. **Design Flaws:** Gaps designed into the product allow water to escape unless extensively caulked. 4. **Curtain Clip Efficiency:** The clip intended to secure shower curtains is often considered ineffective or counterproductive. 5. **Caulk Dependency:** The need for extra materials (not included) like caulk makes installation less straightforward. 6. **Appearance Concerns:** Aesthetically unpleasing, particularly if dirt or hair becomes embedded in the adhesive or caulk. 7. **Limited Returns:** Potentially poor customer service limits returns, frustrating users dissatisfied with the product. 8. **Complex Installation Process:** It requires customization and adaptation during installation to function properly. 9. **Prone to Leakage:** Without additional sealing, it is prone to allowing leaks due to inherent design issues. 10. **Negative Long-Term Use Feedback:** Long-term users have reported dissatisfaction, often removing them after persistent underperformance. **Conclusion** The Magic Splash Guard Kit offers a promising solution for those looking to prevent water spillage from their shower or tub. While the concept is praised for its innovation, the execution sometimes falls short, with installation issues and material limitations highlighted in customer reviews. A capable product when customized and installed correctly, it nevertheless falls to the user to address the design oversights. For those willing to put in the extra effort with caulking, the guard may indeed live up to its name, making it a consideration for any budget-conscious DIY bathroom upgrade. **FAQ** 1. **How do I install the Magic Splash Guard Kit?** - Installation involves adhering the guards to the tub's corners with the included tape, but caulking is recommended to ensure it’s waterproof. 2. **Does it fit all tub and shower designs?** - It's primarily designed for strict 90-degree angles, and users must frequently adapt it for different configurations. 3. **Can it be repositioned once applied?** - Repositioning can be difficult due to the strong adhesive nature, which might leave residue or damage surfaces. 4. **What should I do if water is leaking from the corner?** - Use silicone caulk around all edges and gaps to prevent leakage effectively. 5. **How durable is the adhesive over time?** - While initially strong, some users report weakening, especially if not supplemented with caulk. 6. **Are there aesthetics considerations?** - The product may appear unsightly if hair or dirt collects on the adhesive or if caulk is added. 7. **Is the shower curtain clip necessary?** - The clip is often deemed ineffective and may not contribute significantly to the guard's overall performance. 8. **What alternatives exist if this doesn’t meet my needs?** - Larger or more robust barriers might be considered if this guard doesn’t suit, especially for unconventional shower designs. 9. **Will it damage my tiles or tub finish?** - Ideally, it should not, but care should be taken during removal to avoid adhesive residue damaging surfaces. 10. **Can it be used without caulk?** - While possible, user reviews strongly recommend caulking for optimal performance and leak prevention.

Regular Price: $6.48
Brand Name: MAGIC
Seller Name: -
Rating:
Total Rating Count: 5312
Magic Splash Guard Kit - Prevent Water from Splash... Magic Splash Guard Kit - Prevent Water from Splash...

Best Proviews by Splash Guards

Buyer Page Image Placeholder

Shower Splash Guard Kit, Large Splash Guards for Bathtub Waterproof Self-Adhesive Shower Corner Guards to Keep Water in Shower or Bath, Pack of 2

Show 2196
Buyer Page Image Placeholder

Silicone Shower Splash Guard, Clear Bathtub Corner Splash Guard, Bathroom Shower Water Guard with Adhesive for Fixing, Can Be Used in Washbasin, Tubs, Sinks Etc - 2Pack

Show 1595
Buyer Page Image Placeholder

2 Pieces Bathtub Shower Splash Guard, Bathroom Bath Tub Splash Guards with 3M Super Viscose, Perfectly Matched to Shower Curtain Weights

Show 2957
Buyer Page Image Placeholder

Magic Splash Guard Kit - Prevent Water from Splashing out of the Bath or Shower- White

Show 6280
Buyer Page Image Placeholder

Shineligee 2 Pack Updated Shower Splash Guard, Large Splash Guards for Bathtub, Consists of Silicone Base and Acrylic Plate, Keep Water in Shower or Bath, Shower Corner Splash Guard

Show 2303
Title: Each box sold has a pair! Great price.
Content: Easy to install! Strong adhesive. Designed to be a little flexible if you bump you foot into it by mistake ( in smaller stand in stalls)
Rating:
Title: Poorly made
Content: Definitely too easy to remove they fit the corners of any tub they're not flexible they are not thick. Did you not stay or stick very good at all. Water will get through the corners because it has a gap made into it. Which is defeating the purpose of buying it
Rating:
Title: Serious design flaws, caulk is needed
Content: If you expect to install these as-is, you will likely have problems. The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve. The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind. The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well. The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it. In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk. Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.
Rating:
Title: Needs caulk
Content: It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless. All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.
Rating:
Title: It works !
Content: This product works like it is intended to. The water is kept from flowing out of the corners of the tub while showering.
Rating:
Title: Not that great
Content: These are easy to use, pretty self explanatory but really don't help much. water goes under them, there is dog hair stuck in the adhesive no matter how hard I try and clean, they are just kind of unsightly and I will probably remove them next time I scrub the tub.
Rating:
Title: Does the job right
Content: Perfect for what we needed. Keeps the water in the tub and out of the basement (by way of getting on the tile and seeping through the flooring's older grout.) I was getting tired of cleaning up the floor in the bathroom and hallway because 'some people' (usually the kids) don't understand how a shower curtain liner works or they are wild in the bathtub sinking battleships and such... I don't think that the clip the manufacturer has on the inside of the guard does much good holding the liner in place because it's set in about an inch away from the shower wall, and would still let the water go out but at a higher point on the wall. It's no big deal, I just don't use it personally. YMMV I would suggest a little bit of caulk (kitchen and bath or something like that) to close off the corner after you have the adhesive doing its job. The flexibility for matching out of square walls is a great benefit of this splash guard, but it does come with a cost of leaving a small opening for water to sneak out in the corner. It certainly doesn't take much caulk to close that up, but you'll thank me for it later!
Rating:
Title: Product is garbage. Will not fit anything except a perfect 90 degree angle.
Content: This product is garbage. It will not fit anything except a perfect 90 degree angle. They claim it has an 'accordion' design so you can compress or expand it to fit other angles. Nice idea, however the 'accordion' area is so stiff that the force required to overcome it is enough to pop off the adhesive on the other side. So while you get the vertical surface adhered, the horizontal surface will detach; or vice-versa. And, there is no ability to return this. Please, do not buy this, it is awful.
Rating:
Title: Simple to install and works well
Content: Got these before and have always been happy with them. The adhesive on them is quite strong, but I always caulk them on too for extra stability. Great if you have kids or to catch any splashes that get past your shower curtain.
Rating:
Title: Keeps the floor
Content: Works well
Rating:
Title: Each box sold has a pair! Great price.
Content: Easy to install! Strong adhesive. Designed to be a little flexible if you bump you foot into it by mistake ( in smaller stand in stalls)
Rating:
Title: Poorly made
Content: Definitely too easy to remove they fit the corners of any tub they're not flexible they are not thick. Did you not stay or stick very good at all. Water will get through the corners because it has a gap made into it. Which is defeating the purpose of buying it
Rating:
Title: Serious design flaws, caulk is needed
Content: If you expect to install these as-is, you will likely have problems. The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve. The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind. The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well. The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it. In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk. Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.
Rating:
Title: Needs caulk
Content: It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless. All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.
Rating:
Title: It works !
Content: This product works like it is intended to. The water is kept from flowing out of the corners of the tub while showering.
Rating:
Title: Not that great
Content: These are easy to use, pretty self explanatory but really don't help much. water goes under them, there is dog hair stuck in the adhesive no matter how hard I try and clean, they are just kind of unsightly and I will probably remove them next time I scrub the tub.
Rating:
Title: Does the job right
Content: Perfect for what we needed. Keeps the water in the tub and out of the basement (by way of getting on the tile and seeping through the flooring's older grout.) I was getting tired of cleaning up the floor in the bathroom and hallway because 'some people' (usually the kids) don't understand how a shower curtain liner works or they are wild in the bathtub sinking battleships and such... I don't think that the clip the manufacturer has on the inside of the guard does much good holding the liner in place because it's set in about an inch away from the shower wall, and would still let the water go out but at a higher point on the wall. It's no big deal, I just don't use it personally. YMMV I would suggest a little bit of caulk (kitchen and bath or something like that) to close off the corner after you have the adhesive doing its job. The flexibility for matching out of square walls is a great benefit of this splash guard, but it does come with a cost of leaving a small opening for water to sneak out in the corner. It certainly doesn't take much caulk to close that up, but you'll thank me for it later!
Rating:
Title: Product is garbage. Will not fit anything except a perfect 90 degree angle.
Content: This product is garbage. It will not fit anything except a perfect 90 degree angle. They claim it has an 'accordion' design so you can compress or expand it to fit other angles. Nice idea, however the 'accordion' area is so stiff that the force required to overcome it is enough to pop off the adhesive on the other side. So while you get the vertical surface adhered, the horizontal surface will detach; or vice-versa. And, there is no ability to return this. Please, do not buy this, it is awful.
Rating:
Title: Simple to install and works well
Content: Got these before and have always been happy with them. The adhesive on them is quite strong, but I always caulk them on too for extra stability. Great if you have kids or to catch any splashes that get past your shower curtain.
Rating:
Title: Keeps the floor
Content: Works well
Rating:
Title: Each box sold has a pair! Great price.
Content: Easy to install! Strong adhesive. Designed to be a little flexible if you bump you foot into it by mistake ( in smaller stand in stalls)
Rating:
Title: Poorly made
Content: Definitely too easy to remove they fit the corners of any tub they're not flexible they are not thick. Did you not stay or stick very good at all. Water will get through the corners because it has a gap made into it. Which is defeating the purpose of buying it
Rating:
Title: Serious design flaws, caulk is needed
Content: If you expect to install these as-is, you will likely have problems. The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve. The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind. The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well. The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it. In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk. Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.
Rating:
Title: Needs caulk
Content: It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless. All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.
Rating:
Title: It works !
Content: This product works like it is intended to. The water is kept from flowing out of the corners of the tub while showering.
Rating:
Title: Not that great
Content: These are easy to use, pretty self explanatory but really don't help much. water goes under them, there is dog hair stuck in the adhesive no matter how hard I try and clean, they are just kind of unsightly and I will probably remove them next time I scrub the tub.
Rating:
Title: Does the job right
Content: Perfect for what we needed. Keeps the water in the tub and out of the basement (by way of getting on the tile and seeping through the flooring's older grout.) I was getting tired of cleaning up the floor in the bathroom and hallway because 'some people' (usually the kids) don't understand how a shower curtain liner works or they are wild in the bathtub sinking battleships and such... I don't think that the clip the manufacturer has on the inside of the guard does much good holding the liner in place because it's set in about an inch away from the shower wall, and would still let the water go out but at a higher point on the wall. It's no big deal, I just don't use it personally. YMMV I would suggest a little bit of caulk (kitchen and bath or something like that) to close off the corner after you have the adhesive doing its job. The flexibility for matching out of square walls is a great benefit of this splash guard, but it does come with a cost of leaving a small opening for water to sneak out in the corner. It certainly doesn't take much caulk to close that up, but you'll thank me for it later!
Rating:
Title: Product is garbage. Will not fit anything except a perfect 90 degree angle.
Content: This product is garbage. It will not fit anything except a perfect 90 degree angle. They claim it has an 'accordion' design so you can compress or expand it to fit other angles. Nice idea, however the 'accordion' area is so stiff that the force required to overcome it is enough to pop off the adhesive on the other side. So while you get the vertical surface adhered, the horizontal surface will detach; or vice-versa. And, there is no ability to return this. Please, do not buy this, it is awful.
Rating:
Title: Simple to install and works well
Content: Got these before and have always been happy with them. The adhesive on them is quite strong, but I always caulk them on too for extra stability. Great if you have kids or to catch any splashes that get past your shower curtain.
Rating:
Title: Keeps the floor
Content: Works well
Rating:
Title: Each box sold has a pair! Great price.
Content: Easy to install! Strong adhesive. Designed to be a little flexible if you bump you foot into it by mistake ( in smaller stand in stalls)
Rating:
Title: Poorly made
Content: Definitely too easy to remove they fit the corners of any tub they're not flexible they are not thick. Did you not stay or stick very good at all. Water will get through the corners because it has a gap made into it. Which is defeating the purpose of buying it
Rating:
Title: Serious design flaws, caulk is needed
Content: If you expect to install these as-is, you will likely have problems. The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve. The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind. The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well. The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it. In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk. Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.
Rating:
Title: Needs caulk
Content: It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless. All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.
Rating:
Title: It works !
Content: This product works like it is intended to. The water is kept from flowing out of the corners of the tub while showering.
Rating:
Title: Not that great
Content: These are easy to use, pretty self explanatory but really don't help much. water goes under them, there is dog hair stuck in the adhesive no matter how hard I try and clean, they are just kind of unsightly and I will probably remove them next time I scrub the tub.
Rating:
Title: Does the job right
Content: Perfect for what we needed. Keeps the water in the tub and out of the basement (by way of getting on the tile and seeping through the flooring's older grout.) I was getting tired of cleaning up the floor in the bathroom and hallway because 'some people' (usually the kids) don't understand how a shower curtain liner works or they are wild in the bathtub sinking battleships and such... I don't think that the clip the manufacturer has on the inside of the guard does much good holding the liner in place because it's set in about an inch away from the shower wall, and would still let the water go out but at a higher point on the wall. It's no big deal, I just don't use it personally. YMMV I would suggest a little bit of caulk (kitchen and bath or something like that) to close off the corner after you have the adhesive doing its job. The flexibility for matching out of square walls is a great benefit of this splash guard, but it does come with a cost of leaving a small opening for water to sneak out in the corner. It certainly doesn't take much caulk to close that up, but you'll thank me for it later!
Rating:
Title: Product is garbage. Will not fit anything except a perfect 90 degree angle.
Content: This product is garbage. It will not fit anything except a perfect 90 degree angle. They claim it has an 'accordion' design so you can compress or expand it to fit other angles. Nice idea, however the 'accordion' area is so stiff that the force required to overcome it is enough to pop off the adhesive on the other side. So while you get the vertical surface adhered, the horizontal surface will detach; or vice-versa. And, there is no ability to return this. Please, do not buy this, it is awful.
Rating:
Title: Simple to install and works well
Content: Got these before and have always been happy with them. The adhesive on them is quite strong, but I always caulk them on too for extra stability. Great if you have kids or to catch any splashes that get past your shower curtain.
Rating:
Title: Keeps the floor
Content: Works well
Rating:
Title: Each box sold has a pair! Great price.
Content: Easy to install! Strong adhesive. Designed to be a little flexible if you bump you foot into it by mistake ( in smaller stand in stalls)
Rating:
Title: Poorly made
Content: Definitely too easy to remove they fit the corners of any tub they're not flexible they are not thick. Did you not stay or stick very good at all. Water will get through the corners because it has a gap made into it. Which is defeating the purpose of buying it
Rating:
Title: Serious design flaws, caulk is needed
Content: If you expect to install these as-is, you will likely have problems. The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve. The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind. The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well. The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it. In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk. Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.
Rating:
Title: Needs caulk
Content: It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless. All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.
Rating:
Title: It works !
Content: This product works like it is intended to. The water is kept from flowing out of the corners of the tub while showering.
Rating:
Title: Not that great
Content: These are easy to use, pretty self explanatory but really don't help much. water goes under them, there is dog hair stuck in the adhesive no matter how hard I try and clean, they are just kind of unsightly and I will probably remove them next time I scrub the tub.
Rating:
Title: Does the job right
Content: Perfect for what we needed. Keeps the water in the tub and out of the basement (by way of getting on the tile and seeping through the flooring's older grout.) I was getting tired of cleaning up the floor in the bathroom and hallway because 'some people' (usually the kids) don't understand how a shower curtain liner works or they are wild in the bathtub sinking battleships and such... I don't think that the clip the manufacturer has on the inside of the guard does much good holding the liner in place because it's set in about an inch away from the shower wall, and would still let the water go out but at a higher point on the wall. It's no big deal, I just don't use it personally. YMMV I would suggest a little bit of caulk (kitchen and bath or something like that) to close off the corner after you have the adhesive doing its job. The flexibility for matching out of square walls is a great benefit of this splash guard, but it does come with a cost of leaving a small opening for water to sneak out in the corner. It certainly doesn't take much caulk to close that up, but you'll thank me for it later!
Rating:
Title: Product is garbage. Will not fit anything except a perfect 90 degree angle.
Content: This product is garbage. It will not fit anything except a perfect 90 degree angle. They claim it has an 'accordion' design so you can compress or expand it to fit other angles. Nice idea, however the 'accordion' area is so stiff that the force required to overcome it is enough to pop off the adhesive on the other side. So while you get the vertical surface adhered, the horizontal surface will detach; or vice-versa. And, there is no ability to return this. Please, do not buy this, it is awful.
Rating:
Title: Simple to install and works well
Content: Got these before and have always been happy with them. The adhesive on them is quite strong, but I always caulk them on too for extra stability. Great if you have kids or to catch any splashes that get past your shower curtain.
Rating:
Title: Keeps the floor
Content: Works well
Rating:
Title: Each box sold has a pair! Great price.
Content: Easy to install! Strong adhesive. Designed to be a little flexible if you bump you foot into it by mistake ( in smaller stand in stalls)
Rating:
Title: Poorly made
Content: Definitely too easy to remove they fit the corners of any tub they're not flexible they are not thick. Did you not stay or stick very good at all. Water will get through the corners because it has a gap made into it. Which is defeating the purpose of buying it
Rating:
Title: Serious design flaws, caulk is needed
Content: If you expect to install these as-is, you will likely have problems. The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve. The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind. The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well. The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it. In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk. Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.
Rating:
Title: Needs caulk
Content: It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless. All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.
Rating:
Title: It works !
Content: This product works like it is intended to. The water is kept from flowing out of the corners of the tub while showering.
Rating:
Title: Not that great
Content: These are easy to use, pretty self explanatory but really don't help much. water goes under them, there is dog hair stuck in the adhesive no matter how hard I try and clean, they are just kind of unsightly and I will probably remove them next time I scrub the tub.
Rating:
Title: Does the job right
Content: Perfect for what we needed. Keeps the water in the tub and out of the basement (by way of getting on the tile and seeping through the flooring's older grout.) I was getting tired of cleaning up the floor in the bathroom and hallway because 'some people' (usually the kids) don't understand how a shower curtain liner works or they are wild in the bathtub sinking battleships and such... I don't think that the clip the manufacturer has on the inside of the guard does much good holding the liner in place because it's set in about an inch away from the shower wall, and would still let the water go out but at a higher point on the wall. It's no big deal, I just don't use it personally. YMMV I would suggest a little bit of caulk (kitchen and bath or something like that) to close off the corner after you have the adhesive doing its job. The flexibility for matching out of square walls is a great benefit of this splash guard, but it does come with a cost of leaving a small opening for water to sneak out in the corner. It certainly doesn't take much caulk to close that up, but you'll thank me for it later!
Rating:
Title: Product is garbage. Will not fit anything except a perfect 90 degree angle.
Content: This product is garbage. It will not fit anything except a perfect 90 degree angle. They claim it has an 'accordion' design so you can compress or expand it to fit other angles. Nice idea, however the 'accordion' area is so stiff that the force required to overcome it is enough to pop off the adhesive on the other side. So while you get the vertical surface adhered, the horizontal surface will detach; or vice-versa. And, there is no ability to return this. Please, do not buy this, it is awful.
Rating:
Title: Simple to install and works well
Content: Got these before and have always been happy with them. The adhesive on them is quite strong, but I always caulk them on too for extra stability. Great if you have kids or to catch any splashes that get past your shower curtain.
Rating:
Title: Keeps the floor
Content: Works well
Rating:
Title: Each box sold has a pair! Great price.
Content: Easy to install! Strong adhesive. Designed to be a little flexible if you bump you foot into it by mistake ( in smaller stand in stalls)
Rating:
Title: Poorly made
Content: Definitely too easy to remove they fit the corners of any tub they're not flexible they are not thick. Did you not stay or stick very good at all. Water will get through the corners because it has a gap made into it. Which is defeating the purpose of buying it
Rating:
Title: Serious design flaws, caulk is needed
Content: If you expect to install these as-is, you will likely have problems. The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve. The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind. The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well. The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it. In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk. Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.
Rating:
Title: Needs caulk
Content: It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless. All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.
Rating:
Title: It works !
Content: This product works like it is intended to. The water is kept from flowing out of the corners of the tub while showering.
Rating:
Title: Not that great
Content: These are easy to use, pretty self explanatory but really don't help much. water goes under them, there is dog hair stuck in the adhesive no matter how hard I try and clean, they are just kind of unsightly and I will probably remove them next time I scrub the tub.
Rating:
Title: Does the job right
Content: Perfect for what we needed. Keeps the water in the tub and out of the basement (by way of getting on the tile and seeping through the flooring's older grout.) I was getting tired of cleaning up the floor in the bathroom and hallway because 'some people' (usually the kids) don't understand how a shower curtain liner works or they are wild in the bathtub sinking battleships and such... I don't think that the clip the manufacturer has on the inside of the guard does much good holding the liner in place because it's set in about an inch away from the shower wall, and would still let the water go out but at a higher point on the wall. It's no big deal, I just don't use it personally. YMMV I would suggest a little bit of caulk (kitchen and bath or something like that) to close off the corner after you have the adhesive doing its job. The flexibility for matching out of square walls is a great benefit of this splash guard, but it does come with a cost of leaving a small opening for water to sneak out in the corner. It certainly doesn't take much caulk to close that up, but you'll thank me for it later!
Rating:
Title: Product is garbage. Will not fit anything except a perfect 90 degree angle.
Content: This product is garbage. It will not fit anything except a perfect 90 degree angle. They claim it has an 'accordion' design so you can compress or expand it to fit other angles. Nice idea, however the 'accordion' area is so stiff that the force required to overcome it is enough to pop off the adhesive on the other side. So while you get the vertical surface adhered, the horizontal surface will detach; or vice-versa. And, there is no ability to return this. Please, do not buy this, it is awful.
Rating:
Title: Simple to install and works well
Content: Got these before and have always been happy with them. The adhesive on them is quite strong, but I always caulk them on too for extra stability. Great if you have kids or to catch any splashes that get past your shower curtain.
Rating:
Title: Keeps the floor
Content: Works well
Rating:
Amazon Subscribe & Save - Unlock Great Deals, Enjoy Hassle-Free Shopping
Description: Discover the convenience of Amazon Subscribe & Save, where you not only secure free standard shipping on auto-deliveries but also gain exclusive benefits. Non-Prime customers may encounter shipping costs for the initial delivery, but the savings thereafter make it worthwhile.
Easily manage your subscriptions within your Amazon account without facing any penalties. This flexibility ensures that you can seize fantastic deals at a reduced price and cancel the subscription at your convenience.
Maximize your savings by unlocking additional discounts through coupon clipping on select subscriptions. Elevate your discount game – save an impressive 15% (compared to the standard 5%) on all items in your subscription when you add 5 or more eligible items to your monthly deliveries.
Stay informed with our friendly reminder emails before each delivery, detailing the item price and any applicable discounts. Keep in mind that prices may fluctuate with each delivery, reflecting the current Amazon.com price at the time of order processing.
  • Protect - Splash guards are effective in protecting your bathroom from water spills. Eliminate - Keep water off the floors when running the shower or bath. Instant - Bonds to shower or bath walls instantly. Simple - No tools or caulk required for easy installation.
Note: This is not an advertisement; we are dedicated to promoting items to assist people in finding deals quickly and efficiently, ultimately saving them money. Explore and test market all the latest deals and promotions conveniently gathered in one website for a seamless and money-saving shopping experience.
go top icon

Cookies Policy

We use cookies to improve your browsing experience on our website. By continuing to use this site, you agree to our use of cookies.

Privacy Policy